Matra Nortel MC 6500 Manual page 16

For MC 6501-L PBX release 11.3 (with 2-channel base stations)
The MC 6501-L PBX must be fitted with the OCT3 CPU card and ADS200 power supply.
A 40 V or 48 V power supply can be used. However, you are recommended to use the 48 V
supply on the faceplate of the ADS200 power supply unit.
♦
LS1 card, reference HJ3924AC or earlier
♦
maximum number of radio base stations: 16
For MC 6501-R PBX (with 2-channel base stations)
Two options are available:
1) ADS150 power supply, reference HR5102AJ or earlier:
♦
48 V power supply not available on the faceplate
♦
40 V remote power supply
♦
maximum number of radio base stations: 10
You can also use the radio base station local power supply. See note about locally-powered
radio base station at the end of section 2.2.3.
You are recommended to upgrade by standard exchange.
2) Power supplies ADS150 or HR5102AK and later:
♦
a 48 V remote power supply is available on the faceplate
♦
LS1 cards (reference HJ3924AC maximum)
♦
maximum number of radio base stations: 10
PAGE 16/171
This confidential document is the property of MATRA NORTEL COMMUNICATIONS and may not be copied or circulated without permission.
Ce document confidentiel est la propriété de MATRA NORTEL COMMUNICATIONS et ne doit pas être reproduit ou communiqué sans autorisation.
LCAH-30521-001-05=01/EN