Table of Contents
Advertisement
9.3.10
DECLARING USERS
To declare a DECT user, use the MMC XLIGAB and select the "Telephone Subscriber"
object.
Define the parameters as follows:
♦
subscriber num: 1 to 6 digits
♦
CCU (cluster): 2 to 39 corresponding to the card position
♦
Extens type: DECT wireless
♦
Reference cell: 0 to 126. Specify the cell in which the user is the most frequently
located
Define the other parameters as you would for a standard telephone user. View the screen
to check the newly created subscriber parameters.
Example of the screen display
Object= Telephone Subscriber
---------------------------------------------------------------Page=1-
--------------------------SUBSCRIBER IDENTITY-------------------------
Input directory num=YES
Site number=2..
CCU=2.
Card=..
Subscriber type=Mono-user
Extens-Type= DECT wireless
Messages languages: Vocal=....
Plans:
P_1 =NO =FT....
LCAH-30521-001-05=01/EN
This confidential document is the property of MATRA NORTEL COMMUNICATIONS and may not be copied or circulated without permission.
Ce document confidentiel est la propriété de MATRA NORTEL COMMUNICATIONSet ne doit pas être reproduit ou communiqué sans autorisation.
TELEPHONE SUBSCRIBERS
Answ=NO
Line=..
P_2 =NO =*
Action=Display
Subscriber num.=7780..
Force creation=NO
Company=0..
Associated Exts.=NO
Emergency Ext.=......
Reference cell =0..
P_3 =NO =*
P_4 =NO =*
Depart.=0..
PAGE
131/171
Advertisement
Table of Contents
Need help?
Do you have a question about the MC 6500 and is the answer not in the manual?