Matra Nortel MC 6500 Manual page 112

9.2.6.2 PUTTING DECT CARDS IN SERVICE - SPECIAL CASES
Uploading a radio base station from PBX release 11.3
A radio base station attached to a PBX in release 11.3 (4-channel compatible) cannot be put
in service directly in 4-channel mode on a PBX in release 11.4. You first have to initialize it and
declare it as 2-channel before fitting it for 4-channel operation.
To put a radio base station in service from a release 11.3 PBX, proceed as follows:
From the menu "Rad. Base Defin.":
1. declare the radio base station as 2-channel before downloading (2-channel)
2. set the STATUS parameter to DISABLED
3. declare the radio base station as 4-channel before to downloading (4-channel)
UPGRADING FROM RELEASE 8.6 TO RELEASE 11.3
1. It is necessary to create a TELBOR server and put it in service.
In menu 2-1-5:
•
enter the TELBOR server directory number: No. 019
•
put the TELBOR server in service
STATUS IN SERVICE
DIRECTORY NUMBER
CATEGORY
REVERSE CHARGING ACCEPTED
ACCESS LISTS
OUTGOING CUG(0-----15)
MODIFY GROUP NUMBER
INCOMING CUG(0-----15)
MODIFY GROUP NUMBER:
MAX. PACKET DATA FIELD SIZE
NR. OF LOGIC CHANNELS EQUIPPED (1/250)
NR. OF OUTGOING LOGIC. CHANNEL (0/250)
NR. OF INCOMING LOGIC. CHANNEL (0/250)
---------------------------------------------------
PAGE 112/171
This confidential document is the property of MATRA NORTEL COMMUNICATIONS and may not be copied or circulated without permission.
Ce document confidentiel est la propriété de MATRA NORTEL COMMUNICATIONS et ne doit pas être reproduit ou communiqué sans autorisation.
SERVER TELBOR
1000000000000000
1000000000000000
........
019.
CATEG_1
NO
........
..
..
128
16.
0..
0..
LCAH-30521-001-05=01/EN