Matra Nortel MC 6500 Manual page 109

F0 AND F1 RANGES
Implementation of a DECT interface card
Menu 3.2
CARD 0-0
CARD 0-1
CARD 0-2
CARD 0-3
CARD 0-4
CARD 0-5
CARD 0-7
CARD 1-0
♦
For each slot in the cabinet, enter the DECT interface card name.
♦
Select the value IN SERVICE in the TYPE field.
Note: For details of card positions and names, see the section in the section concerned.
F2 RANGES
Putting a DECT interface card in service
For this range:
♦
select Menu 3.2 "Card management"
♦
select the equipment position corresponding to DECT interface cards.
CARD 0-01
CARD 0-02
CARD 0-03
CARD 0-04
CARD 0-05
CARD 0-07
CARD 1-10
♦
For each slot in the cabinet, enter the DECT interface card name.
♦
Select the value IN SERVICE in the TYPE field.
Note: For details of card positions and names, see the section in the section concerned.
LCAH-30521-001-05=01/EN
This confidential document is the property of MATRA NORTEL COMMUNICATIONS and may not be copied or circulated without permission.
Ce document confidentiel est la propriété de MATRA NORTEL COMMUNICATIONSet ne doit pas être reproduit ou communiqué sans autorisation.
CARD MANAGEMENT
: TYPE
: TYPE
: IN SERVICE
: TYPE
: TYPE
: TYPE
: TYPE
: DISABLES
: TYPE
: TYPE
: IN SERVICE
CARD MANAGEMENT
: TYPE
: IN SERVICE
: TYPE
: TYPE
: TYPE
: TYPE
: OPERATOR CONTROLLED
: TYPE
: TYPE
: IN SERVICE
...........
LS1 2S0
..........
...........
...........
...........
LS2 REDUCED
..........
...........
LD4
..........
LDS 8 access
..........
...........
...........
...........
LAS
..........
...........
LDS 16 accesses
..........
PAGE 109/171