Table of Contents
Advertisement
Quick Links
Models
Descriptions
AG 4
Pneumatic Angle Grinder
AG 7
Pneumatic Angle Grinder
Read this manual carefully before installing, operating or servicing this equipment. It's the responsi-
bility of the employer to ensure this manual is read by the operator. Please preserve this manual.
This document is issued with Product Serial No
Operation and Maintenance Guide
AG 4
AG 7
IMPA Code
59 03 01
59 03 02
Advertisement
Table of Contents
Related Manuals for Teryair AG 4
Summary of Contents for Teryair AG 4
- Page 1 Operation and Maintenance Guide AG 4 AG 7 Models Descriptions IMPA Code AG 4 Pneumatic Angle Grinder 59 03 01 AG 7 Pneumatic Angle Grinder 59 03 02 Read this manual carefully before installing, operating or servicing this equipment. It’s the responsi- bility of the employer to ensure this manual is read by the operator.
-
Page 2: Table Of Contents
Page 2 Table of Contents Introduction Technical Data Intended Use Safety Instructions Maintenance Suggested Lubricants Test Certificate Of Materials, Performance Eu Declaration Of Conformity Warranty Certificate FF-MM-407-REV - 00... -
Page 3: Introduction
Operation and Maintenance Guide Pneumatic Angle Grinder Page 3 Introduction Teryair Pneumatic Angle Grinders are well suited for rugged production use. They are economical- ly designed and kept as light as possible to reduce fatigue. Speed governors are standard equipment which ensure optimum performance. -
Page 4: Maintenance
Page 4 remove socket head screws four nos for Daily Before Operation wheel guard (5) along with four spring washers (4) and remove wheel guard (5) Disconnect and pour in 1 to 2 ounces of recommended oil into the air inlet and recon- 3. -
Page 5: Suggested Lubricants
Operation and Maintenance Guide Pneumatic Angle Grinder Page 5 Lubrication Requirements Always install a line lubricator on the air line as close to the tool as possible. A filter-regulator lubricator unit (FRL) is strongly recommend- ed. Keep the lubricator bowl topped up with recommended grade of oil and check that the oil is reaching the tool. -
Page 6: Test Certificate Of Materials, Performance
Page 6 TEST CERTIFICATE OF MATERIALS, PERFORMANCE Date : Model number : Part description & s.No. : We hereby certify that the above referenced product has tested and inspected in accordance with our standard test proce- dures and meets the specifications for material and performance values as published in our literature. We further certify that the product has been given our standard factory test and meets all quality and performance standards established by the compa- ny. -
Page 7: Eu Declaration Of Conformity
Palghar – 401208, Maharashtra, India. CE certification registration no – C E 16832 Issued by – BMQR Certifications Pvt Ltd. www.cemarking-india.com Valid Till – 03/11/2021 Signed for and on behalf of TERYAIR EQUIPMENT PVT. LTD. Place of Issue: Date: FF-MM-407-REV - 00... -
Page 8: Warranty Certificate
Teryair; (vii) the issue with a Product is directly or indirectly attributable to, or directly or indirectly results from or arises out of, compliance with any design, specification or other specific requirement of Dealer/End User;... - Page 9 Operation and Maintenance Guide Pneumatic Angle Grinder Page 9 This page is intentionally Left blank. FF-MM-407-REV - 00...