Suggested Lubricants - Teryair AG 4 Operation And Maintenance Manual

Operation and Maintenance Guide Pneumatic Angle Grinder
Lubrication Requirements
Always install a line lubricator on the air line as
close to the tool as possible. A filter-regulator
lubricator unit (FRL) is strongly recommend-
ed. Keep the lubricator bowl topped up with
recommended grade of oil and check that the oil
is reaching the tool. Running the tool without
lubrication is likely to cause damage to the
components causing premature replacement.

Suggested Lubricants

Brand
Shell
Mobil
Esso
Caltex
Cp
Texaco
Daltron
Burmah Castrol
Duckham
Sternol
Petrofina
Chevron
Above 27oC / 80oF 5oC to 27oC / 41oF to 80oF
Toona R 72 Toona R 41
Almo 529 Almo 527
-- Arox EP.65
Rando Oil 100 Rando Oil 100
-- --
Regal Oil F (R&O) Regal Oil PE(P&E)
Silkolene 881 Silkolene 548/T
Castrol RD Oil 3 Castrol RD Oil Light
Garnet 7 Garnet 6
Merlin 87 Merlin 71
Purifoc 53 Purifoc 46
Vistac Oil 18X Vistac Oil 19X
Page 5
Below 5oC / 80oF
Toona R 27
Almo 525
Arox EP.45
Rando Oil 46
Airolene Tool OiI
Regal Oil PE(R&O)
Silkolene 733
Megna SPX
Zero Fio 5
Merlin 54
Purifoc 32
Vistac Oil 9X
FF-MM-407-REV - 00