Canon IMAGE FORMULA DR-7550C Reference Manual page 24

• Note that scanning the following types of documents can
cause a paper jam or malfunction. To scan such a document,
make a photocopy of the document and then scan the
photocopy.
Wrinkled or creased
documents
Curled documents
Torn documents
Documents with
paper clips or staples
• To scan bound multi-page documents such as invoice
booklets, place the bound edge against the feeder inlet and
scan by manual feeding.
• To use the Long Document Mode, feed document pages
manually, one after another.
Document Feeder Capacity
DR-6050C:
Up to 300 sheets of good quality paper or up to 1.10"
(28 mm) high (maximum)
DR-7550C/9050C:
Up to 500 sheets of good quality paper or up to 1.89"
(48 mm) high (maximum)
IMPORTANT
Do not exceed the load limitation mark when placing documents
in the Document Feed Tray. It may cause paper jams.
16
Carbon paper
Coated paper
Extremely thin,
translucent paper
Small Size
Limitation
Mark
Large Size
Limitation
Mark
Small Size Limitation Mark:
When placing documents that are smaller than LTR/A4 size.
Large Size Limitation Mark:
When placing documents that are larger than LTR/A4 size.
■ Long Document Mode Setting
Using the Long Document mode, pages up to 118.11"
(3 m) long can be scanned. You can set the Long
Document Mode setting from the User Mode.
1.
Press the Menu key on the control panel.
Menu Key
The User Mode is activated.
2.
Press the [ ] key four times to display Long
Document Mode.