About The Temperature Control System; About Ion; About Thumb Holder - Panasonic EH-HV70 Operating Instructions Manual

Multi-styling straightener
Hide thumbs Also See for EH-HV70:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

About the temperature control system

Standby mode
At temperature setting of 230 °C, 200 °C and 180 °C, if the
straightener is left unused for approximately 10 minutes, the
temperature will automatically lower to 160 °C.
The indicator light will blink alternately
between 230 °C, 200 °C, or 180 °C
and 160 °C
Once the straightener is used again, or the [-] or [+]
temperature setting switches are pressed, the temperature
will return to 230 °C, 200 °C, or 180 °C.
►Note
● Place hair in the center of the iron plate to use.
(If hair is placed on edge of the iron plate, the straightener
may not be able to detect it is in use.)
Automatic shut OFF function
This unit will automatically turn off when 60 minutes have
passed from the start of use.
The power will shut off even if you are using this unit, so in this
event, please turn on the power once again.
After using this unit, even if you forget to shut off the power,
after 60 minutes have passed, it will automatically turn off.
The 230 °C, 200 °C, or 180 °C
light will blink and then light up.
(Depending on use, it may light
up without flickering.)

About ion

Ions are particles that combine negatively charged oxygen
and moisture in the air, and cannot be seen through the naked
eye.
(Ion generation method: High-voltage discharge)
►Notes
● You may notice a characteristic odor when using this
appliance. This is caused by the ozone it generates and is
not harmful to the human body.
● A humming noise may come out of the Ion Outlet, but this is
the sound of ion being discharged and is not a malfunction.

About thumb holder

This thumb holder is for easy holding.
This dimple helps you to hold the straightener easier with
more stability.
9

Advertisement

Table of Contents
loading

Table of Contents