Panasonic EH-HV70 Operating Instructions Manual page 12

Heating the iron plate
1
1
Release the Open/Close
Lock.
2
2
Insert the plug into the household outlet.
3
3
Press the Power Switch to
turn on the straightener.
• Confirm that the Temperature
Setting Lamp for 130 is blinking.
• Do not use the straightener if all the Temperature
Setting Lamps are blinking.
4
4
Set a temperature by using
the Temperature Setting
Switches according to the
type and condition of your
hair.
• When you use the straightener for the first time, be sure
to set the temperature to 130 °C.
12
• The temperature is raised using [+] and lowered using [–]
of the Temperature Setting Switches.
Release
Indicator
• When the selected Temperature Setting Lamp stops
blinking (and glows), the straightener has reached the
selected temperature.
(Note that the time taken to reach operating temperature
may vary depending on the operating environment.)
►Notes
• A temperature level of more than 200 °C is high and
may damage your hair.
We recommend that you avoid continuous lengthy use
of this level, and only use it if your hair is in a suitable
condition.
• After switching on, the straightener reaches operating
temperature (approximately 100 °C) after about
15 seconds.
• Please be careful as your hair will be hot after using.
Temperature Hair type
Approx. 230 °C Wavy
Approx. 200 °C
Approx. 180 °C
Approx. 160 °C
Straight
Approx. 130 °C
Hair
condition
Less
damaged
Damaged