Page 3
FM switch to “ON” position to turn on speakerphone. It will automatically go into PAIRING OFF/ON/ MODE – status LED flashes BLUE alternately. On your device – Turn on Bluetooth, search and select “Avantree Roadtrip” to connect. Once connected, you will hear “Connected” prompt from speakerphone. Slide to “ON” (middle) position Tap “Avantree Roadtrip”...
Page 4
Press and hold the knob switch until the FM display flashes. And then, rotate the knob switch to change the FM frequency steps to 1 MHz per step. Install speakerphone to sun-visor Clip the Avantree Roadtrip to the sun visor above the driver’s seat. 4 / 6...
Page 5
Clear pairing history/factory reset Conducting a factory reset on the speakerphone will clear all past pairing data and restore the default settings for the product. You may want to reset your Roadtrip if you have trouble pairing them with your devices.
Page 6
LED indicators & Voice prompts LED INDICATOR STATUS SPEAKERPHONE STATUS VOICE PROMPTS Blue led on 1 second Power on "Power on" blue led flash alternate Pairing in progress “Pairing” Successful connection “Connected” Blue led flash once every 5 seconds Connected Failed connection or disconnected “Disconnected”...
Need help?
Do you have a question about the Roadtrip and is the answer not in the manual?
Questions and answers