Table of Contents
Advertisement
T10030—folding Engine Stand. When it comes
to engine rebuilds, nothing beats the convenience
of an engine stand. this stand is made of heavy
square tubing, durable steel casters and has
folding outriggers to reduce shop space when
not in use. rear mounting attachment points are
fully adjustable and an indexed swivel lets you
rotate the engine every 45°. approximate shipping
weight: 98 lbs.
figure 13. t10030 folding engine stand.
H3266—Engine Cleaning Gun. Connect this
engine Cleaning gun to your air compressor and
detergent solution and you've got a highly efficient
cleaning tool. angled tip at the end of a 9" long
wand lets you reach difficult areas. Comes with
solvent feed hose.
figure 14. h3266 engine cleaning gun.
g7812/g7813 engine Crane
Maintenance Schedule
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check:
•
damaged chain or lifting hardware.
•
Worn or damaged wheels.
•
loose or missing fasteners or cotter pins.
•
leaking hydraulic fluid.
•
Cracked or broken welds.
•
any other unsafe condition.
Hydraulic Oil Level
1.
lower the boom fully so the ram is completely
retracted into the cylinder, and remove the
rubber plug (figure 19).
rubber plug
Cylinder and
reservoir
release
Valve
figure 19. hydraulic service.
2.
Fill the reservoir with any standard hydraulic
oil until oil runs from the port, and reinstall the
plug.
3.
use the valve control socket at the end of the
lift lever to close (turn clockwise) the release
valve (figure19).
3.
insert the lever into the fulcrum socket, and
jack up the boom to the maximum height to
bleed the hydraulic system.
4.
repeat Steps 1 and 2 to top off the hydraulic
oil.
Fulcrum
socket
piston
pump
-11-
Advertisement
Table of Contents
