Table of Contents
Advertisement
Operation Safety
To reduce the risk of property damage,
serious personal injury, or death when
using this engine crane, take the following
precautions:
Do not overload this engine crane
•
beyond its load rating.
•
Never allow anyone to work under a
load supported by an engine crane. Use
jack stands to support the load.
•
ONLy use this engine crane on a hard
level surface capable of sustaining the
load being lifted.
•
Only connect lifting hooks, fasteners,
chains, or straps at points that can
safely support the load and prevent
unpredictable load swing or shift.
•
Always make sure that when the engine
or load is about to be hoisted that the
floor is clean and all tripping hazards
are removed.
•
Always apply the parking brake, and
use wheel chocks against the tires to
prevent accidental rolling when engines
are being removed or installed.
•
Keep as much of your body as possible
out from underneath the vehicle when
repositioning or removing jack stands.
•
Never modify this engine crane.
Any engine crane cylinder repair
•
must only be performed by a qualified
hydraulic specialist.
•
Never lower the boom quickly so the
load drops and slams onto a pallet or
the floor.
•
Never allow children to play with or
near the engine crane while in use or in
storage.
•
Never attempt to roll the engine crane
with the boom in the raised position or
the load and crane may tip due to a high
center of gravity. Only move with the
load as low as possible.
-8-
To reduce the risk of
serious injury when using
this machine, read and
understand
manual before beginning
any operations.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLy
RECOMMEND that you read books, trade
magazines, or get formal training before
beginning any projects. Regardless of the
content in this section, Grizzly Industrial
will not be held liable for accidents caused
by lack of training.
Make sure that the legs are locked in
the down position before using the Model
G8712 Engine Crane. Ignoring this warning
can cause the load and crane to tip and fall
causing serious personal injury.
Operation
1.
before using this engine crane, make sure
that it is filled with a standard hydraulic oil
and that the air is bled from the system.
2.
refer to your vehicle owner's manual to
locate the safe lifting/support locations for the
engine, and make sure that the load does not
exceed the maximum weight for the engine
crane.
3.
block the wheels to prevent the vehicle from
rolling.
4.
prepare
and
disconnect
transmission as outlined in the vehicle
manufacturer's service manual. Follow all
safety precautions.
g7812/g7813 engine Crane
this
entire
the
engine/
Advertisement
Table of Contents
