4.IR infrared mode:
Switch on the device and switch to black / white mode by holding
down the IR button for a long time. You can change the mode (IR1-
3) or switch it off again by briefly pressing the IR button (the symbol
at the top right of the screen shows the IR level and changes with
the setting). You can focus the IR lamp manually by pulling it out or
pushing it in.
5. Menu operation:
To get into the menu, press the menu button. Use the arrow keys to
move up or down the menu. To select a submenu, briefly press the
OK button. To exit the menu, briefly press the menu button.
1. Color:
Go to the "Color" submenu and press "OK". Use the arrow keys to
select "normal, b / w". Confirm the entry with OK".
2.IR-LED brightness:
Go to the "IR LED Brightness" submenu and press "OK". Use the
arrow buttons to select "from, 1, 2, 3". Confirm the entry with OK".
If you press the IR button in black and white mode, the brightness
can be changed immediately.
3.LCD brightness:
Go to the "LCD Brightness" submenu and press "OK". Use the arrow
keys to select "LVL 1, LVL 2, LVL 3, LVL 4". Confirm the entry with
OK".
4. Resolution:
Go to the submenu and select "1920x1080, 30P or 1280x720, 60P"
and press "OK".
14