Advertisement
Available languages
Available languages
Installation:
1. Battery:
Use the rechargeable lithium battery 3.7V, 18650, 3200 mAh. Uns-
crew the cover of the battery compartment and insert the battery
with the positive pole first. Attention: Battery discharge protection:
the adhesive film before inserting remove at the battery pole! Now
screw the battery compartment again to.
2. Setting:
Switch the device on using the on / off switch a. Turn the eyepiece
diopter adjustment ring until you see the symbol bole can see clearly
on the display. Then turn that Lens focus adjustment ring until you
see a clear image can. Now test the different modes and that IR in-
frared light.
3. Attach the lens mounting ring:
Click the lens mount tag ring on the front of the device. Attach the
mounting ring with the screws on the optics. Should be your optics
be narrower than the mounting ring, you can use a with the adapter
rings supplied, level out and fix.
1. Switch on / off:
To turn on the device, press the on / off button. To switch off, press
the on / off switch longer. The display remains on as long as the de-
vice is switched on.
2. Eyepiece diopter adjustment:
Turn the ring until you can see the symbols in the picture clearly.
3. Lens focus adjustment ring:
Make sure that the diopter adjustment of the eyepiece has been car-
ried out. Aim the device at your target and rotate the lens focus ad-
justment ring until you can see a clear image.
13
Advertisement
