Safety And Instruction Decals; Setup; Loose Parts - Toro 78490 Operator's Manual

Safety and Instruction Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or lost.
106-5855
1. Warning—read the Operator's Manual.
2. To avoid tipping or losing control, add weight to the front of the
machine.

Setup

Note: Determine the left and right sides of the machine from the normal operating position.
Important
Contact an Authorized Service Dealer for
the required dump handle kit when installing this bagger on
a machine with a Rollover Protection System (ROPS).

Loose Parts

Note: Use the chart below to verify all parts have been shipped.
Description
Template
Bolt, 7/16 x 5–1/2 in.—Kawasaki engines only
Bolt, 7/16 x 4–3/4 in.—Kohler engines only
Drive pulley assembly
Clutch spacer
Bolt, #6 x1/2 in.
1. Thrown object hazard—do not operate the mower with the
deflector up or removed; keep the deflector or grass collector in
place.
2. Cutting/dismemberment hazard of hand or foot, mower
blade—stay away from moving parts.
Qty. Use
1 Drilling holes into the clutch
1
1
1 Installing the clutch and drive pulley assembly
1
1
4
106-5856