7.3 WEEE Waste of Electric and Electronic Equipment Directive 2002/95/EC, 2002/96/EC and 2003/108/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment, and waste electrical and electronic equipment This symbol, crossed out wheelie bin, on the product or on its packaging indicates that this product must not be disposed of with your other household waste.
Using the machine Index Delivery and warranty 6.1 - Foreward Introduction ATTENTION! How to keep and use this manual Only authorized personnel can use the machine. Warranty Before beginning work the operator must make sure that all the protections are in Description of the machine place and that the safety devices are fitted and working properly.
Page 4
Using the machine 1. Microswitch on the lever Foreward While the machine is running lift the presser until the microswitch ntervenes Using the sieve and stops the machine. Keep the presser still in the point in which the microswitch interve nes and check that the space between the loading inlet and the presser is such to block Maintenance fingers from entering.
Start up and stop Delivery and warranty 1.1 - Introduction 5.1 - Checking the correct electrical connection ATTENTION! ATTENTION! The purpose of the symbols used in this manual is to draw the reader’s attention to Check that the feeding line corresponds to the value reported on the identification points and operations that can endanger the personal safety of the operators or plate of the machine and that it is outfitted with an efficient floor plug.
1.3 - Warranty 3.4 - Connection to the electrical system The user is not authorized to tamper with the machine for any reason. If there is a ATTENTION! fault contact the manufacturer. Any attempts at dismantling or tampering with any Make sure the electrical source corresponds to the value reported on the identifica- component of the machine in general by the user or unauthorized personnel will tion plate of the machine.
Testing, transport, delivery, and installation 1.6 - Forbidden uses The machine must only be used for the purposes expressly intended by the manu- facturer. In particular: 3.1 - Testing Do not use the machine to grate food products other than cheese, bread and The machine in your possession has been tested in our facotry to ensure it runs the like.
Page 8
As a memorandum we suggest filling in your machine data in the following box. 2.5.3 - 220 three-phase electrical diagram Grater model…..………… Serial N°…………………. Year of construction……………. Type……………………………... ATTENTION! Do not, for any reason, alter the data given on the plate. A = Grater model B = Serial number C = Motor power Watts...
Page 9
2.5.2 - 400-V three-phase electrical diagram 1.8 - Protections and safety devices Fig. 1.8.1 ATTENTION! Before using the machine make sure that the devices are correctly positioned and in perfect working order. At the beginning of each work shift check that they are fitted and working properly; if not, notify the head of maintenance.
1.10 - Vibrations 2.4 - Noise level The vibrations that the machine transmits to the table are not important. Testing of the level of noise emitted from the machine indicates that the level is lower than 70 dBA. Technical features The manufacturer can supply a copy of the noise test upon request.
Need help?
Do you have a question about the GRATER HP 1,5 and is the answer not in the manual?
Questions and answers