Laterals - Convaid YoYo User Manual

Laterals

Laterals
To Adjust:
Laterals
1. Remove Back Cushion. Fig. 81
Height Adjustment
2. Using 5/32" L-wrench key and 7/16 wrench driver,
To Adjust:
loosen the hardware and
To Adjust:
1. Remove Back Cushion. FIG.67
adjust hard ware as needed to provide user with
1. Remove Back Cushion. Fig. 81
2. Using 5/32" Allen-wrench key and 7/16 wrench, loosen the hardware and adjust up to add height
adequate trunk support
2. Using 5/32" L-wrench key and 7/16 wrench driver,
or down to reduce height.
3. Retighten the hardware Fig. 82
loosen the hardware and
3. Retighten the hardware.
adjust hard ware as needed to provide user with
adequate trunk support
FIG.67
3. Retighten the hardware Fig. 82
ACCESSORIES
Fig. 81
To Remove:
Remove Back Cushion. FIG.67
1.
To Install:
2. Use 7/16" wrench to loosen hardware.FIG.68
1. Remove Back Cushion. Fig. 83
Fig. 81
3. Loosen button head bolt and washer from height adjustable back. FIG.70
2. Remove bolt and washer from back pan. Fig. 84
4. Repeat on opposite side.
3. Attach lateral support and insert bolt for desired
To Install:
height hole on height
1. Remove Back Cushion. Fig. 83
adjustable back. Fig. 85
2. Remove bolt and washer from back pan. Fig. 84
4. Using 5/32" L-wrench key and 7/16 wrench
3. Attach lateral support and insert bolt for desired
driver, tighen the hardware
height hole on height
FIG.69
5. Repeat on opposite side
adjustable back. Fig. 85
4. Using 5/32" L-wrench key and 7/16 wrench
driver, tighen the hardware
5. Repeat on opposite side
Tilt Cable Bracket
FIG.71
Fig. 83
Note: To adjust lat-
Note: DO NOT USE center slot
eral height down to
minimum range,
Fig. 83
Width Adjustment:
To Remove:
remove the cable
bracket using a 1. Remove Back Cushion.
1. Remove Back Cushion. FIG.71
Note: DO NOT USE center slot
5/32" L wrench key 2. Use 7/16" wrench driverto loosen hardware.
2. Remove bolt and washer from back pan. FIG.72
and 7/16 wrench 3. Loosen button head bolt and washer from height adjustable back.
To Remove:
3. Attach lateral support and insert bolt for desired height hole on height
driver and re-attach 4. Repeat on opposite side.
1. Remove Back Cushion.
adjustable back. FIG.73
with laterals, with-
2. Use 7/16" wrench driverto loosen hardware.
4. Using 5/32" Allen-wrench key and 7/16 wrench, tighen the hardware
out washer.
3. Loosen button head bolt and washer from height adjustable back.
5. Repeat on opposite side.
4. Repeat on opposite side.
FIG.68
Fig. 82
Fig. 82
.
FIG.70
MAX
.
MIN
First Slot
FIG.72
Fig. 84
Fig. 84
ACCESSORIES
ACCESSORIES & OPTIONS
ACCESSORIES
Note: To adjust lat-
eral height down to
minimum range,
remove the cable
Note: To adjust lat-
bracket using a
eral height down to
5/32" L wrench key
minimum range,
To Re-locate Tilt Cable:
and 7/16 wrench
remove the cable
1. Using 5/32" Allen-wrench key and 7/16
driver and re-attach
bracket using a
wrench, loosen the hardware.
with laterals, with-
5/32" L wrench key
2. For min. lateral range move tilt cable out washer.
and 7/16 wrench
bracket up at least 3 slot. FIG. 69 & 70
driver and re-attach
with laterals, with-
out washer.
FIG.73
Fig. 85
Fig. 85
25
31