Advertisement
Assembly hints
1.3 Soldering Hints :
Mount the component against the PCB surface and carefully solder the
leads
Make sure the solder joints are cone-shaped and shiny
Trim excess leads as close as possible to the solder joint
AXIAL COMPONENTS ARE TAPED IN THE CORRECT
Velleman hereby certifies that the device K6727 meets
the essential requirements and all other relevant stipulations of directive
For the complete conformity declaration check out :
Http://www.velleman.be/downloads/doC/CE_K6727.pdf
4
MOUNTING SEQUENCE !
REMOVE THEM FROM THE TAPE
ONE AT A TIME !
1999/5/EG and 1995/5/EC.
Advertisement
