Mitsubishi Electric DD-6030 Service Manual page 28

2-2-2. Output PC Board
1. Remove the top cover. (Refer to item 2-1-1.)
2. Peel off two tapes (1) and remove the connector (2).
3. Remove two flexible cables (3).
4. Remove five screws (4), then remove the output PC
board (5).
Connector (2)
Twist more than 9 times.
Fig. 2-1-21
Tapes (1)
Screws (4)
Flexible
cable (3)
Output
PC board (5)
Flexible
cable (3)
Screws (4)
2-2-3. Power PC board
1. Remove the power bush (1).
2. Peel off two tapes (2) and remove two connectors (3).
3. Remove four screws (4), then remove the power
supply PC board (5).
Screws (4) Power bush (1)
Connector (3)
Twist more than 9 times.
Fig. 2-1-22
Power supply
PC board (5)
Tapes (2)
Connector (3)