Rear Panel; Front Panel - Mitsubishi Electric DD-6030 Service Manual

<Tray Panel Removal>
1. Eject the tray (1). (Refer to item 1-1-2.)
2. Twist the tray panel (2) a little in the arrow A direction
with the tray (1) hold by hand to release two claws and
lift up the tray panel (2) in the arrow B direction, then
the tray panel (2) is removed.
3. When mounting the tray panel (2), insert the tray panel
(2) along the grooves of the both sides of the tray (1)
until clicking.
B
Tray (1)
B
Tray
A
panel (2)
A
Tray (1)
Fig. 2-1-3

1-1-3. Front Panel

1. Remove one flexible cable (1).
2. Release four claws, then remove the front panel (2).
Claw
Front
panel (2)
Claws
Fig. 2-1-4
Tray
Claw
Panel (2)
Claw
Flexible cable (1)
Claw
1-1-4. Tray
1. Pull out the tray (1) towards you until it stops.
2. Lift up claw A with a minus screwdriver, and pull out
the tray (1) towards you, then remove the tray (1).
Tray (1) Claw A
Minus screwdriver
Minus
screwdriver
Pull out the tray (1)
toward you.
Fig. 2-1-5

1-1-5. Rear Panel

1. Remove the bush (1).
2. Remove four screws (2), then remove the rear panel
(3).
Bush (1)
Fig. 2-1-6
Mechanism
chassis assembly
Tray (1)
Screws (2)
Rear panel (3)