Wilson & Fisher CHESAPEAKE BL15034 Manual

Tile top table

WILSON & FISHER

CHESAPEAKE

TILE TOP TABLE

MODEL :BL15034

Warranty Coverage Requirements:

1. Copy of your Original Store Receipt.

2. Pictures of the damaged parts.

3. You must know the name of your product and any corresponding item

numbers as well as the name of the store where you purchased the item.

4. Please gather all of this information BEFORE you call customer service.

Table of Contents

Do you have a question about the CHESAPEAKE BL15034 and is the answer not in the manual?

Page 1 WILSON & FISHER ® CHESAPEAKE TILE TOP TABLE MODEL :BL15034 Warranty Coverage Requirements: 1. Copy of your Original Store Receipt. 2. Pictures of the damaged parts. 3. You must know the name of your product and any corresponding item numbers as well as the name of the store where you purchased the item. 4.
Page 2 ASSEMBLY INSTRUCTIONS *Before assembling,make sure that you lay out and indentify all parts listed in the parts list. *All bolts should be hand tightened before use. Never use power tools or excessive force during assembly and tightening of bolts. *Please place the table on a flat protected surface during assembly. *Before you tighten all screws, make any necessary adjustments on legs.
Page 3 ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS STEP 1: Move the tiles from the table top to a soft place. Place the table top ( A ) face down on a protected surface. STEP 2: 1) Firmly insert table leg ( C ) into the frame of the table top ( A ), using screw ( E ) and washer ( G ) 2) Attach leg support ( B ) to leg ( C ) by inserting the screws ( E ) through the holes in leg ( C ).
Page 4 PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY PLEASE SEPARATE AND INDENTIFY ALL PARTS, MAKING SURE THAT YOU HAVE ALL OF ★ THE PARTS LISTED. SHOULD YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY PARTS ARE ★ MISSING OR DAMAGED CONTACT SERVICE CENTER. PLEASE PROVIDE THE FOLLOWING INFORMATION: ★...