Wilson & Fisher PALM HARBOR 850081 Instructions Manual

40 inch square printed glass table

PALM HARBOR 40 INCH SQUARE

PRINTED GLASS TABLE

MODEL :850081

MODELO:850081

Warranty Coverage Requirements:

1. Copy of your Original Store Receipt.

2. Pictures of the damaged parts.

3. You must know the name of your product and any corresponding item

numbers as well as the name of the store where you purchased the item.

4. Please gather all of this information BEFORE you call customer service.

WILSON & FISHER

Table of Contents

Do you have a question about the PALM HARBOR 850081 and is the answer not in the manual?

Page 1 WILSON & FISHER ® PALM HARBOR 40 INCH SQUARE PRINTED GLASS TABLE MODEL :850081 MODELO:850081 MODELO:850081 Warranty Coverage Requirements: 1. Copy of your Original Store Receipt. 2. Pictures of the damaged parts. 3. You must know the name of your product and any corresponding item numbers as well as the name of the store where you purchased the item.
Page 3 GLASS TABLE LEG FRAME LEG SUPPORT ALLEN HEAD SCREW ALLEN HEAD SCREW SCREW CAPS WASHERS ALLEN WRENCH...
Page 4 STEP 1 Step 1: Place the table top (A) face down on the flat floor, and then firmly insert the table leg frame (B) by using screws (E), nut caps (F) and washer (G). Don’t tighten all the screws until step 2.
Page 5 PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY ★ PLEASE SEPARATE AND INDENTIFY ALL PARTS, MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED. ★ SHOULD YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY PARTS IS MISSING OR DAMAGED CONTACT SERVICE CENTER.
Page 6 Do not discard any of the packaging until you have checked that you have all the parts and the pack of fittings. Keep children away during assembly. This item contains small parts which can be swallowed by children. Children should always be under direct adult supervision while using the product.