Your pendant has already been programmed by us.
Follow these steps so you will be ready in an emergency.
Step 1.
Turn your pendant on. Press the side button until it vibrates
(4-5 seconds), then release. A voice prompt will announce that it
is turning on. (See illustration 1)
Step 2.
Connect the lanyard to the Lingo. Unless you plan to carry it in
some other way. (See illustration 2)
Step 3.
Press the SOS button until it vibrates (2-3 seconds), then release.
A voice prompt will announce, "Your alarm has been activated.
Cancel by pressing the SOS button." (See illustration 3)
Step 4.
Cancel the SOS by briefly pressing the SOS button. A voice
prompt will announce, "Your alarm has been cancelled."
Alternatively, do not cancel, and your first emergency contact
will soon be called. (See illustration 3)
Step 5.
Recharge your Lingo by connecting the USB cable to the wall
plug and the other end to the Lingo (See illustrations 4, 5 and 6).
When connected, a voice prompt will announce, "Your alarm is
charging."
Turn over this Page for answers to FAQ
G u a r d i a n
S A F E T Y P E N D A N T S
QUICK START USER GUIDE
READ THIS FIRST!
It is working and ready to go!
Illustrations
1.
2.
3.
4.
5.
6.