Interface And Indicator Description - Ebyte NA111-A User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.

3.2 Interface and Indicator Description

No. Name
1 Restore
2 RJ45
3 G
4 A
5 B
6 PWR-LED
7 TXD-LED
8 RXD-LED
9 M0-LED
10 M1-LED
11 PWR
[Note] When the network cable is not connected, PWR, TXD,RXD, and M0 all light up, and the device is in
standby state.
Copyright ©2012–2022,Chengdu Ebyte Electronic Technology Co.,Ltd.
Function
Restore Press and hold for 5 seconds to restore factory Settings
Ethernet Ethernet interface
Signal ground RS458 signal ground, The first pin of the 3 x 3.81mm terminal
RS458 signal A connects to RS485 signal A of the terminal
RS458 signal A
device, Second pin of the 3 x 3.81mm terminal
RS458 signal B connects to RS485 signal B of the terminal
RS458 signal B
device, The third pin of the 3 x 3.81mm terminal
Power LED The power input indicator is steady on
Data sent: Light on.
Serial send light
No data sent: Lights off.
Serial reception Data sent: Light on.
indicator No data sent: Lights off.
TCP mode: network connection, light on. The network is down
Link light and the lights are off.
UDP mode: The light is always on.
The network cable is connected and the light is always on.
STATE indicator
The network cable is disconnected and the light goes out.
2*5.08mm power input interface, the left side is positive, the
power interface right side is negative;
Power input range: DC8-28V.
NA111-A_User_Manual
Instruction
8