Pioneer AVX-MG2037ZF Service Manual page 114

1
- Mechanism 5: [B* **] Disc change (tray selection) NG Upper 2 digits
Upper two
Class
digits
B1 Mechanism
A
B2 Mechanism
B3 Mechanism
B6 Mechanism
The third digit Target Disc No.
The fourth digit EVL Err stop position before retry
- Mechanism 6:
[C* **] The tray does not move up to the eject/insert position (elevation
movement including shutter opening).
[D* **] The tray does not move down from the eject/insert position to the home
position (elevation movement including shutter closing).
Upper two
Class
digits
B
C1 Mechanism
C2 Mechanism
C3 Mechanism
C6 Mechanism
D1 Mechanism
D2 Mechanism
Mechanism
D3
Mechanism
D4
Mechanism
D6
Mechanism
D7
The third digit
The fourth digit
C
D
114
1
2
Contents
DISCSEL Err
DISCSEL Err
DISCSEL Err
DISCSEL Err
Contents
LIFT Err
LIFT Err
LIFT Err
LIFT Err
LIFT Err
LIFT Err
LIFT Err
LIFT Err
LIFT Err
LIFT Err
The current Disc No.
EVL err stop position before retry
AVX-MG2037ZF/XN/UC
2
3
Description and cause
The elevation does not move in the UP direction or stops.
The elevation does not move in the DOWN direction or stops.
The carriage cannot reach the target tray.
The carriage mechanism passes the target tray.
Description and cause
During LIFTUP, the shutter does not open completely.
During LIFTUP, abnormal conditions occurred.
During LIFTDN, abnormal conditions occurred.
The elevation does not move in the DOWN direction or stops.
During LIFTDN, the carriage mechanism cannot reach the target tray.
During LIFTDN, foreign substances were detected around the slot.
During LIFTDN, the carriage mechanism passes the target tray.
During LIFTDN, foreign substances were detected around the slot.
3
4
4