LEGRAND PlexoTM 0 697 94 Quick Start Manual

PlexoTM - Wireless light switch (peripheral)
0 697 94
This pack is a connected accessory which requires you to buy and install the connected
starter pack and «... with Netatmo» connected power outlets, switches and/or connected
lighting micromodules first.
This product controls only «... with Netatmo» connected switches (with dimmer
option), lighting micromodules and power outlets + cable outlets.
Pack contents
Surface mounting box with
membrane glands
1 gang
Frequency bands : 2,4 - 2,4835 Ghz
Power level : < 100 mW
Usage temperature : +5°C - +45°C
www.legrand.fr
LEGRAND - Pro and Consumer Service - BP 30076
87002 LIMOGES CEDEX FRANCE • www.legrand.com
Start to configure the installed products:
Take the Home/Away wireless switch near to the gateway power outlet Control
and press the middle of the wireless switch until its light briefly turns green, and then
stop pressing.
The indicator lights on the products which you have wired will turn green one by
one.
ON/OFF wireless light switch module
(battery included)
Control mechanism
Rocker
3
Fix the box on the wall, then install the membrane glands and the cover plate
Do not power the product. Dry contact only.
Prepare the auxiliary wireless switch
Remove the battery's
protective strip to
power the auxiliary
wireless switch
Briefly press on a button of the auxiliary wireless
switch to activate it. The indicator lights will flash
green and then switch off.
Do not install the auxiliary wireless swich in its box. The installation will be completed in
steps 6 & 7.
Pair the auxiliary wireless switch
Make sure that the indicator lights on the wired products are green and not
flashing. If not, go back to step 1.
How to pair an auxiliary wireless switch ?
2
or
This product controls only switches, lighting
micromodules, cable outlets and power outlets
«... with Netatmo».
You can control only one light or appliance
with the auxiliary wireless switch.
4