Connecting Your Whiteboard - Polaroid IBID Operation User's Manual

Whi te board Us er Guid e

Connecting Your Whiteboard

1 1 1 1
Plug the AC power cable into the connector on the
bottom of the whiteboard, next to the serial port.
2 2 2 2
Twist the connector to place the cable behind the
cable bracket.
3 3 3 3
Plug the power adapter into an outlet.
O O O O
To avoid damaging your whiteboard, always
plug the power cable into the whiteboard first,
then into an outlet.
4 4 4 4
Locate an available 9- or 25-pin male serial port on
your PC. (If no serial port is available, install a card
with a standard 9-pin or 25-pin connector.)
5 5 5 5
Plug the 9-pin male end of the serial cable into the
whiteboard and tighten the screws.
Serial Cable
6 6 6 6
Plug the other end into your PC's serial port (if nec-
essary, use the 9-to-25-pin adapter) and tighten the
screws.
O O
O O
The maximum serial cable length is 25 feet
(7.5 meters).
1-4
All manuals and user guides at all-guides.com
Green LED
AC Power Cable
Installing & Configuring ibid
Cable Bracket
Power Adapter