Whi te board Us er Guid e
Entering and Leaving Projection Mode
Once you have configured your system for projection
(see Configuring Projection on page 8-2), you can enter
or leave Projection mode in one of three ways:
•
•
•
Projection mode is indicated by the lit Projection LED on
the whiteboard and the
Projection Mode Basics
Controlling your PC
In Projection mode, your finger or the stylus provided
with the whiteboard act as a mouse:
O
O
O
O
These are default settings with the left mouse
button down. If you set the right button down
as the default (see Projection Tab Settings on
page 8-7), add an extra tap for each action.
•
•
•
O
O
O
O
Use only your finger or the stylus in Projec-
tion mode, not the markers (see Annotating in
Projection Mode on page 8-10).
•
8-8
All manuals and user guides at all-guides.com
On the whiteboard, press Projection.
In ibid, click
.
In ibid, select Edit->Projection.
ibid
Tap the whiteboard once to click.
Tap the whiteboard twice rapidly to double-click.
Hold your finger or the stylus down and pull it
across the surface to simulate a click-and-drag
operation (e.g., to move a dialog).
For a right click, touch Right Click on the
Dashboard, then tap the whiteboard.
Using Projection with ibid
Dashboard on screen.
ibid