Connecting Your Whiteboard - Polaroid 310723 User Manual

Whi te board Us er Guid e

Connecting Your Whiteboard

1 1 1 1
2 2 2 2
3 3 3 3
O O O O
4 4 4 4
5 5 5 5
Serial Cable
6 6 6 6
O O O O
1-4
Plug the AC power cable into the connector on the
bottom of the whiteboard, next to the serial port.
Twist the connector to place the cable behind the
cable bracket.
Plug the power adapter into an outlet.
To avoid damaging your whiteboard, always
plug the power cable into the whiteboard first,
then into an outlet.
Locate an available 9- or 25-pin male serial port on
your PC. (If no serial port is available, install a card
with a standard 9-pin or 25-pin connector.)
Plug the 9-pin male end of the serial cable into the
whiteboard and tighten the screws.
Green LED
AC Power Cable
Plug the other end into your PC's serial port (if nec-
essary, use the 9-to-25-pin adapter) and tighten the
screws.
The maximum serial cable length is 25 feet
(7.5 meters).
Installing & Configuring ibid
Cable Bracket
Power Adapter