Table of Contents

Advertisement

Feed Garden –
Every 2 weeks, both the "Add Nutrient" and "Water Level Low"
lights will blink on and off. At that time...
Follow the rinse directions below before adding nutrient tablets.
This will keep your Garden healthy.
1
Unplug AeroGarden and carefully
remove the Bowl from the Base and
bring it to a sink.
2
Remove the Grow Surface from
the Bowl and place on a counter
near the sink.
(Hint: Lift the View Door and slide
one hand into the Bowl. Don't
worry if you gently tear some roots.)
3
Empty contents of Bowl into sink.
4
Rinse and empty Bowl. Use only water.
5
Fill Bowl with room-temperature
water up to "Fill To Here" and set
Bowl on counter.
6
Place Grow Surface back on Bowl,
arranging the roots over Cross Beams.
7
Carefully replace Bowl on Base and
plug in AeroGarden.
8
Add 2 Mini Rose nutrient tablets and
press the "Reset" button.
Note: We recommend checking for bugs every time you add nutrients.
See Troubleshooting on page 17 of this Guide for details.
9
Tending Your Garden
All Other AeroGarden Models
Bowl
Grow Surface
Cross
Beams
AeroGarden Classic shown.
Base
Bowl

Advertisement

Table of Contents
loading

Table of Contents