Braun TexStyle 9 12790002 Manual page 10

Dry ironing
Set the steam regulator (4) on position «0»
(= steam off).
(B) Auto off
For safety and reduced power consump-
tion, the auto-off function is automatically
activated when the iron is positioned
horizontally on its soleplate for about 1
minute or vertically on its heel rest for about
8 minutes.
• When the iron is in the auto-off mode the
temperature control LED (7) is blinking.
• To turn the iron on again, just move it
forward.
• Before start ironing again wait until the
temperature control LED is turned on.
(C) After ironing
• Unplug the iron and empty the water tank.
• Let the iron cool down before storing.
(D) Descaling
Preparation
1. Set the steam regulator (4) on position
«0» (= steam off).
2. Fill the water tank.
3. Plug in.
4. Wait until the temperature control LED
(7) turns permanently on and unplug
the iron. Hold the iron over the sink.
5. Turn the steam regulator clockwise
beyond steam stetting «6». When you
hear a click pull it out vertically until the
end of the spring appears. It must not
be removed completely.
Self clean
6. Move the appliance over the sink. Hot
water and steam will come out from the
soleplate along with the calc particles
from the steam chamber.Repeat 1.-6.
Rinsing the valve
To maintain optimum performance, the
valve located on the lower end of the turbo
steam button has to be rinsed regularly
(whenever steam development is
insufficient).
7. Immerse the lower end of the valvein
vinegar (not vinegar essence) or lemon
juice for a minimum of 30 minutes.
8. Brush off remaining residues and rinse
under running water.
Reset
9. Re-insert the steam regulator, firmly
push it down and turn it back to steam
setting «6».
10. Refill the water tank.
10
11. Plug in.
12. Wait until the temperature control
LED turns permanently on.
Note: The iron must never be used without
steam regulator.
Do not use commercial decalcifiers,
they may damage the iron.
Note: Frequency of descaling depends on
the hardness of the water, quantity of steam
used and frequency and duration of ironing
sessions.
It is a good practice to run the descaling
procedure at least once per month.
(E) Soleplate cleaning
• Before cleaning, always make sure that
the iron is switched off, unplugged and
has cooled down completely.
• Never use chemicals, vinegar or scouring
pads (eg. sponges with coarse nylon
fabrics etc).
For UK Only
Guarantee Information
All Braun Household products carry a
minimum guarantee period of two years.
(see below for listof exceptions) The rights
and benefits under this guarantee are
additional to your statutory rights which are
not affected.
Please keep your receipt as this will
form the basis of your guarantee.
In the unlikely event of a breakdown you have
access to professional help from our team
simply by calling:
02392 392333
For service in the Republic of Ireland please
call:
012475471
Braun Household undertakes within the
specified period to repair or replace any
part of the appliance, free of charge (with
the exception of any glass or porcelain-ware
incorporated in the product) found to be
defective provided that;
• We are promptly informed of the defect.
• The product is used and maintained in
accordance with the User Instructions.
• The appliance has not been altered in any
way or subjected to misuse or repair by a
person other than an authorised service
agent for Braun Household.
• No rights are given under this guarantee
to a person acquiring the appliance
second hand or for commercial or
communal use.
• Any repaired or replaced appliance will be
guaranteed on these terms for the
unexpired portion of the guarantee.
• The need for repair has not been caused