Transmission; Video System - GE A1456W User Manual

Transmission

Video System

Use this setting to configure your video system to your current
area.
1. Select the Video System in the Connection Setup menu.
2. Use the Up/Down navigation buttons to select NTSC or
PAL. Then press the
button to confirm.
The video output signal can be switched to NTSC or PAL to
accommodate different regional standards. The appropriate
setting will vary between regions.
NTSC: USA, Canada, Taiwan, Japan, etc.
PAL:
Europe, Asia (excluding Taiwan), Oceania, etc.
Note:
The TV output will not perform properly if an
incorrect video system is selected.
65