Before First Use; Inserting/Replacing The Batteries; Using - Westfalia 82 98 44 Instruction Manual

Infrared soap dispenser
Table of Contents

Advertisement

Before first Use

Remove the device from the packaging. Keep packag-
ing material out of reach of children. There is a risk of
suffocation!

Inserting/Replacing the Batteries

1. The battery compartment (9) is located on the bottom
side of the soap dispenser. Depress the latch of the
battery compartment lid and open the battery com-
partment.
2. Insert 4 new batteries of the type LR03 into the
battery compartment. Pay attention to the proper
polarity of the batteries. The polarity is indicated on
the battery compartment lid.
3. Close the battery compartment with the lid.
The "BATTERY LEVEL" display on the right side
indicates the charging state of the batteries when the
unit is switched on. Replace the batteries with 4 new
batteries of the same type if the flow rate becomes
lower respectively if the battery level indicator shows
zero bars. If four bars are displayed, the batteries are
fully charged.

Using

1. Insert 4 new alkaline batteries (not included), as
outlined above, into the battery compartment.
2. Turn the filling tank cover 1/8 turn counter clockwise
to open the tank. Fill the tank (e.g. with substances
such as fluid soap, rinsing agent, hand lotion, etc.).
Using
10

Advertisement

Table of Contents
loading

Table of Contents