IHP BVCBK Instruction Sheet

Door ADjustment AnD CAre InstruCtIons
For VILLA VIstA™ WooD-BurnInG FIrePLACes
Door KIt Contents
1 ea. Door Assembly
1 ea. Instruction Sheet
Cat. no. model
F1862 BVCBK Arch Door, Black
H3279 BVCG Arch Door, Gold Plated 24K
H3281 BVCBn Arch Door, Brushed nickel
GenerAL InFormAtIon
This instruction sheet explains how to adjust the alignment of the door
and includes glass care instructions.
If you encounter any problems, need clarification of these instructions or
are not qualified to properly install this kit, contact your local distributor
or dealer.
Read this instruction sheet in its entirety before beginning.
ALL WArnInGs AnD PreCAutIons In tHe InstALLAtIon AnD
oPerAtIon mAnuAL ProVIDeD WItH tHe APPLIAnCe APPLY to
tHese InstruCtIons.
sHut DoWn tHe APPLIAnCe AnD ALLoW It to ComPLeteLY CooL
BeFore ProCeeDInG.
Door ADjustment
The door of the Villa Vista™ fireplace must be completely airtight. To
make sure that the door is totally airtight, a paper should not be able to
slide between the fireplace facade and the door's gasket. If the door is
not totally airtight, there is a screw on the right side of the fireplace facade
that can be tightened to adjust the door.
If the alignment of the door needs to be adjusted, simply loosen the upper
screw and the lower screw on each hinge which fix the door to the facade
(note that the middle screw does not need to be loosened). The door can
then be moved side-ways in order to allow for a proper fit.
IHP reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor
for fireplace code information.
Printed in U.S.A. © 2005 IHP LLC
P/n F142 rev. C 04/2014
Door KIts
Where used
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
P/n F142
rev. C, 04/2014
If there is difficulty closing the door because there is too much compres-
sion of the gasket between the door and the fireplace facade (especially
on the hinge side), then adjusting the space between the door and the
fireplace facade will solve that problem. To adjust, loosen all the screws on
each hinge that are fixed on the door. Push the door toward the fireplace
facade to increase the space or pull it toward you to reduce that space.
Hinge screws
HINGE SCREWS
Figure 1
GLAss CAre - rePLACement
The glass used for the Villa Vista fireplace is a high temperature ceramic
glass (1400° F). If the glass breaks, it must be replaced with a ceramic
glass. Tempered glass or ordinary glass will not withstand the high
temperatures of the Villa Vista fireplace. Replacement glass should
be purchased from a IHP dealer. Do not oPerAte tHe unIt WItH
CrACKeD or BroKen GLAss.
GLAss CAre - CLeAnInG
The Villa Vista fireplace is designed to keep the glass clean under normal
operating conditions. If the Villa Vista fireplace is operated continuously
with the combustion air damper closed, the glass will tend to get dirty
unless the fuel, firebox and glass are maintained at hot temperatures. To
clean the glass, there are a number of specially designed cleaners. Your
IHP dealer can recommend a suitable cleaner which is available in your
area. Regular household glass cleaners will not clean creosote. Do not
use abrasives such as steel pads, steel wool or oven cleaner as they will
scratch the glass.
Innovative Hearth Products LLC
1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210
HEARTH PRODUCTS
KITS AND ACCESSORIES
Door ADjustment
VILLA VIstA™ FIrePLACe
Gasket Adjustment screw
GASKET ADJUSTEMENT SCREW
Door Hinge screws
DOOR HINGE SCREWS
1