Summary of Contents for Channel Lock VOM205P-C 2001
Page 1
2.5 GALLON WET/DRY VACUUM MODEL: VOM205P-C 2001 CAUTION: FOR YOUR SAFETY Read and understand this manual before use. Keep this manual for future reference. Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. You will enjoy years of safe, reliable service if you use your tool properly and only for the purpose for which it is intended.
SAFETY INSTRUCTIONS & WARNINGS IMPORTANT SAFETY INSTRUCTIONS Read and understand all instructions before using this vacuum. Read and understand this owner’s manual and all labels on the Wet/Dry Vacuum cleaner before operating. Safety is a combination of common sense, staying alert and knowing how your vacuum works.
• Do not put any object into ventilation openings. Do not vacuum with any ventilation openings blocked; keep free of dust, lint, hair or anything that may • and moving parts. • To reduce the risk of falls, use extra care when cleaning on stairs. When using as blower: •...
WARNING: SERVICING OF DOUBLE-INSULATED WET/DRY VACUUMM WITH A DOUBLE-INSULATED WET/DRY VACUUM, TWO SYSTEMS OF INSULATION ARE PROVIDED INSTEAD OF GROUNDING. NO GROUNDING MEANS IS PROVIDED ON A DOUBLE-INSULATED APPLIANCE, NOR SHOULD A MEANS FOR GROUNDING BE ADDED. SERVICING A DOUBLE INSULATED WET/DRY VACUUM REQUIRES EXTREME CARE AND KNOWLEDGE OF THE SYSTEM, AND SHOULD BE DONE ONLY BY QUALIFIED SERVICE PERSONNEL.
UNPACKING AND CHECKING CARTON CONTENTS Remove entire contents of carton. Check each item against the carton contents list. Key Description Vac Assembly ....1 Wall Mounting Support ..1 Hose .
GENERAL ASSEMBLY INSTRUCTIONS A Phillips head screwdriver is required. WARNING: DO NOT PLUG IN POWER CORD TO POWER OUTLET, MAKE SURE PLUG IS DISCONNECTED BEFORE ASSEMBLING THE WET/DRY VAC. UNPACKING YOUR WET/DRY VACUUM & GENERAL ASSEMBLY 4. Remove the contents from inside the container, make sure you have all 5.
IMPORTANT! • • Do not screw the rack to drywall only. Secure the screws to a stud. • Do not hang from or sit on the vacuum when on mounting rack. 11. Align the two screw holes so that they are over a stud and secure the POLARIZED PLUG To reduce the risk of electrical shock, this appliance has a polarized plug (one the plug in any way.
10 for installation instructions.) 3. Place the power head section back on the container, and secure it in place OPERATING INSTRUCTIONS: DRY VACUUMING 4. Insert the larger end of the hose into the vacuum port on the power head. Push the required attachment onto the free end of the hose or extension. 6.
WARNING: DO NOT PLUG IN POWER CORD TO POWER OUTLET, MAKE SURE PLUG IS DISCONNECTED BEFORE ASSEMBLING THE WET/DRY VAC. DO NOT USE THE REUSABLE CLOTH FILTER FOR LIQUID VACUUMING. OPERATING INSTRUCTIONS – WET VACUUMING 4. Verify that the switch is in the ‘O’ OFF position before plugging the power 6.
WARNING: KEEP BYSTANDERS CLEAR FOR BLOWING DEBRIS. WARNING: WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT BE INHALED. Make sure the container is empty before using as a blower. Remove hose from the vacuum port. Insert the larger end of the hose into the blowing port on the back side of the MAINTENANCE &...
WARNING: ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE REMOVING THE POWER HEAD FROM CONTAINER. INSTALLING AND CLEANING REUSABLE CLOTH FILTER Installing Reusable Cloth Filter Remove power head and place in upside down position. Replace and lock the power head on to the container. Removing and Cleaning Reusable Cloth Filter With the removed power head in the upside down position.
Cleaning Foam Sleeve Filter With the removed power head in the upside down position, carefully remove TROUBLESHOOTING WARNING! TO REDUCE THE RISK OF ELECTRICAL SHOCK - ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE TROUBLESHOOTING. SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION Vacuum will not 1.
EXPLODED VIEW AND PARTS 300439 MANUAL PARTS LIST KEY NUMBER DRAWING NUMBER DESCRIPTION QUANTITY 551200101 Handle Power Head Assembly 551012115 Water Seal Cup Assembly 551012116 Filter Cage Tank Assembly 551012104 Suction Seat 551012107 Mounting Rack Assembly 551098111 Rack Holder Assembly 551012109 1-1/4"...
WARRANTY We take pride in producing a high quality, durable product. This Channellock® product carries a limited two (2) year warranty against defects in workmanship and materials from date of purchase under normal household use. If product is to be used for commercial, industrial or rental use, a 90 day limited warranty will apply.
Need help?
Do you have a question about the VOM205P-C 2001 and is the answer not in the manual?
Questions and answers