Summary of Contents for Channel Lock VJC607PF-C 2001
Page 1
VJC607PF-C 2001 CAUTION: FOR YOUR SAFETY Read and understand this manual before use. Keep this manual for future reference. Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. You will enjoy years of safe, reliable service if you use your tool properly and only for the purpose for which it is intended.
SAFETY INSTRUCTIONS & WARNINGS IMPORTANT SAFETY INSTRUCTIONS Read and understand all instructions before using this vacuum. Read and understand this owner’s manual and all labels on the Wet/Dry Vacuum cleaner before operating. Safety is a combination of common sense, staying alert and knowing how your vacuum works.
• Turn off Wet/Dry Vac before unplugging. • Do not put any object into ventilation openings. Do not vacuum with any ventilation openings blocked; keep free of dust, lint, hair or anything that may • and moving parts. • To reduce the risk of falls, use extra care when cleaning on stairs. When using as blower: •...
WARNING: SERVICING OF DOUBLE-INSULATED WET/DRY VACUUMM WITH A DOUBLE-INSULATED WET/DRY VACUUM, TWO SYSTEMS OF INSULATION ARE PROVIDED INSTEAD OF GROUNDING. NO GROUNDING MEANS IS PROVIDED ON A DOUBLE-INSULATED APPLIANCE, NOR SHOULD A MEANS FOR GROUNDING BE ADDED. SERVICING A DOUBLE INSULATED WET/DRY VACUUM REQUIRES EXTREME CARE AND KNOWLEDGE OF THE SYSTEM, AND SHOULD BE DONE ONLY BY QUALIFIED SERVICE PERSONNEL.
GENERAL ASSEMBLY INSTRUCTIONS A Phillips head screwdriver is required. WARNING: DO NOT PLUG IN POWER CORD TO POWER OUTLET, MAKE SURE PLUG IS DISCONNECTED BEFORE ASSEMBLING THE WET/DRY VAC. UNPACKING YOUR WET/DRY VACUUM & GENERAL ASSEMBLY 4. Remove the contents from inside the container, make sure you have all 5.
DRY-VACUUM OPERATION DRY VACUUMING WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION, ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO; LIGHTER FLUID, SOLVENT TYPE CLEANERS, OIL-BASE PAINTS, GASOLINE, ALCOHOL OR AEROSOL SPRAYS.
LIQUID VACUUM OPERATION LIQUID VACUUM CLEANING WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION, ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO; LIGHTER FLUID, SOLVENT TYPE CLEANERS, OIL-BASE PAINTS, GASOLINE, ALCOHOL OR AEROSOL SPRAYS.
BLOWING OPERATION WARNING: ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 (OR IN CANADA, CSAZ94.3) BEFORE USING BLOWER WARNING: KEEP BYSTANDERS CLEAR FOR BLOWING DEBRIS. WARNING: WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT BE INHALED. 1. Verify that the power cord is disconnected from the outlet. 2.
IMPORTANT: ALWAYS USE DUST FILTER FOR DRY VACUUMING. If the machine is used WARNING: KEEP BYSTANDERS CLEAR FOR BLOWING DEBRIS. WARNING: WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT BE INHALED. INSTALLING AND CLEANING FILTERS Installing Cartridge Filter 2.
4. Replace the power head on to the container. Cleaning Foam Sleeve Filter 1. With the removed power head in the upside down position, carefully remove TROUBLESHOOTING WARNING! TO REDUCE THE RISK OF ELECTRICAL SHOCK - ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE TROUBLESHOOTING.
EXPLODED VIEW AND PARTS 300440 MANUAL PARTS LIST KEY NUMBER DRAWING NUMBER DESCRIPTION QUANTITY 551049101 Handle Assembly 551017125 Screw ST3.9*16 Power Head Assembly 551005103 Water Seal Cup Assembly 551005104 Filter Basket Tank Assembly 551011106 Suction Seat 551069105 Caster Foot Assembly 353879 WET/DRY Cartridge Filter 300443...
WARRANTY We take pride in producing a high quality, durable product. This Channellock® product carries a limited two (2) year warranty against defects in workmanship and materials from date of purchase under normal household use. If product is to be used for commercial, industrial or rental use, a 90 day limited warranty will apply.
Need help?
Do you have a question about the VJC607PF-C 2001 and is the answer not in the manual?
Questions and answers