Swing Circle; Track Shoe; Grease Pump - Komatsu PC1250 -8 Shop Manual

SEN00892-04
3. Filing method
File by the brochures in the correct order of the form number printed in the shop manual composition
table.
q Revised edition mark
When a manual is revised, the ones and tens digits of the form number of each brochure is
increased by 1. (Example: 00, 01, 02 ...)
q Revisions
Revised brochures are shown in the shop manual composition table.
4. Symbols
Important safety and quality portions are marked with the following symbols so that the shop manual will
be used practically.
Symbol
k
a
4
3
2
5
Oil, coolant
6
5. Units
In this shop manual, the units are indicated with International System of units (SI). For reference, con-
ventionally used Gravitational System of units is indicated in parentheses { }.
8
Item
Safety Special safety precautions are necessary when performing work.
Special technical precautions or other precautions for preserving stan-
Caution
dards are necessary when performing work.
Weight of parts of component or parts. Caution necessary when
Weight
selecting hoisting wire, or when working posture is important, etc.
Tightening Places that require special attention for tightening torque during
torque assembly.
Coat Places to be coated with adhesives, etc. during assembly.
Places where oil, etc. must be added, and capacity.
Drain Places where oil, etc. must be drained, and quantity to be drained.
00 Index and foreword
Remarks
PC1250-8