Advertisement
>Patented TwinDrag™ system
FEATURES
>Billet 6061 - T6 aluminum
>6 Class-5 ABEC stainless steel bearings
>17-4 Heat treated stainless steel gears and
gear shaft
>Larger, stronger gear shaft and anti reverse
bearing
>Titanium drag friction washers
>Unhindered free-spool at every
drag setting
>Greased AccuDrags
>Stainless-steel springs,
harness lugs
and clips
>Oversized handle
>QuickShift two-speed
>1 Year warranty
>AccuCare reel service
>Proudly designed, manufactured and
assembled in the USA
>Left-handed models available
pursuetheoutdoors.com/schematics
, screws
(BX2-30 and BX2-50 Only)
(Applies to BX2 Reels Only)
THE TWINDRAG
EVEN DRAG PRESSURE
Drag pressure
Friction Washer
Drag washer
Traditional fishing reel design applies the drag pressure to
only one side of the spool — resulting in uneven pressure
placed on reel components and excessive heat buildup.
The TwinDrag™ system applies equal pressure to both
sides of the spool which distributes the drag friction over
the surface of two drag plates instead of one. That's 50%
of the total drag pressure on each side, resulting in a
smoother drag with less heat build-up and a balanced load
on reel bearings and spool. TwinDrag reels also have
extremely accurate drag settings with very little fluctuation.
In fact, Boss reels will fluctuate less than 1-pound in total
drag when line is drawn at any speed. For example: when
the drag is set to 20 pounds on a Boss reel, drag pressure
will only vary between 19.5 and 20.5 pounds, or less!
SYSTEM
™
Drag pressure
Friction Washer
Drag washer
1
Advertisement
