Reading And Writing Data On A Memory Card - Sony MRW68E-D1 Operating Instructions Manual

Reading and Writing Data on a
Memory Card
x For Windows
The following explanation is illustrated with
screens from Windows XP.
The screens may differ for other Windows
versions.
1
Open [My Computer].
2
Make sure the removable disk
icons appear in [My Computer].
Drive letter for the removable disk icon is
assigned in alphabetical order to the
memory card slot.
For example, if the computer has an A:,
C: and D: drive before connecting the
reader/writer, the drive letters will be
assigned as E: when the reader/writer is
connected:
3
Use the removable disk icon to
read or write data on the memory
card.
If the following message appears, the
memory card has not been recognized
correctly, remove the card and insert it
again.
Not
Notes
• Use the removable disk icon for the memory
card you are using.
• It may take a while for the removable disk icons
to appear.
• If the removable disk icons do not appear, follow
the steps under "Disconnecting the Reader/
Writer From the Computer" on page 11 to
disconnect the reader/writer, and then wait at
least 5 seconds before reconnecting it.
If the [Safely Remove Hardware] icon
mentioned in step 1 of "Disconnecting the
Reader/Writer From the Computer" is not
displayed, skip the rest of the procedure and
immediately disconnect the reader/writer.
• Depending on your operating system and the
type of memory card you are using, the reader/
writer drives may be recognized as "Local
Disks" instead of "Removable Disks," but this
will not affect their operation.
9