Ssid Wifi Qr Code - ZyXEL Communications NR2101 User Manual

Table 25 SSID SETTINGS (5GHz) (continued)
LABEL
Hide SSID
Password
Security Type
Bandwidth
Channel
See the rest of this chapter for information on the other labels in this screen.

7.3 SSID WiFi QR Code

Click SSID SETTINGS(2.4GHz/5GHz) and then click the QR code icon(
code to connect WiFi screen appears. Use this screen to scan the 2,4GHz or 5GHz QR code and join the
WiFi network.
Figure 68 SSID SETTINGS-2.4 GHz > SSID
Chapter 7 WLAN & WWAN
DESCRIPTION
Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
Enter a password (of up to 8-64 characters including spaces and special characters)
the WiFi stations need to enter to connect to the WiFi network.
Select WPA-PSK, WPA2-PSK or WPA3/WPA2 mixed mode to add a layer of security to
this WiFi network. The WiFi clients which want to connect to this network must have
the same WiFi security settings as the NR2101. See
detailed information on different security modes. Or you can select None (Open) to
allow any WiFi client device to connect to this network without authentication.
Select an operating frequency depending on your particular region. Choices are
20M, 20/40M, or 20/40/80M.
Select a channel from the drop-down list box. The options vary depending on the
frequency band and the country you are in. Choice are Auto Select,
36,40,44,48,149,153,157 and161.
NR2101 User's Guide
67
Section 7.3.1 on page 68 for
) in the SSID field. The Scan QR