Remote Control Button - Panasonic CS-PC12MKF Service Manual

14.2. Remote Control Button

14.2.1. SET BUTTON
• To check remote control transmission code and store the transmission code to EEPROM.
- Press "SET" button for more than 10 seconds by using pointer.
- Press "TIMER SET" button until a "beep" sound is heard as confirmation of transmission code change.
14.2.2. RESET
• To clear and restore the remote control setting to factory default.
- Press once to clear the memory.
14.2.3. TIMER
• To change indoor unit indicator's LED intensity.
- Press continuously for 5 seconds.
14.2.4. TIMER
• To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F).
- Press continuously for 10 seconds.
52