Advertisement
Assembly hints
1.3 Soldering Hints :
Mount the component against the PCB surface and carefully solder the
leads
Make sure the solder joints are cone-shaped and shiny
Trim excess leads as close as possible to the solder joint
AXIAL COMPONENTS ARE TAPED IN THE CORRECT
Velleman hereby certifies that the device K6706B/G meets
the essential requirements and all other relevant stipulations of directive
For the complete conformity declaration check out :
Http://www.velleman.be/downloads/doC/CE_K6706B.pdf
Http://www.velleman.be/downloads/doC/CE_K6706G.pdf
4
MOUNTING SEQUENCE !
REMOVE THEM FROM THE TAPE
ONE AT A TIME !
1999/5/EG and 1995/5/EC.
Advertisement
