Datalogic Kyman-NET Vehicle Cradle Manual

TECHNICAL FEATURES
Kyman-NET™ Vehicle Cradle
Electrical Features
Power Supply
Consumption
(with mobile computer)
Quiescent Consumption
(without mobile computer)
Indicators
Charge Time
(when mobile computer is off)
Communication Features
Interface
Baud Rate
Environmental Features
Working Temperature*
Storage Temperature
Humidity
Degree of Protection
Vibration Resistance EN60068-2-64 frequency range 5-1000 Hz; acceleration
RMS: 3.1 g; initial slope: 26dB/oct 5-10 Hz; final slope: -3dB/oct 10-1000 Hz
Shock Resistance EN60068-2-29 – ±25g, 6ms duration, 500 shock impacts per axis
Mechanical Features
Dimensions
Weight
* Battery must be charged at a temperature ranging from 0° to +45 °C (+32° to +113 °F).
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval of Datalogic could void
the authority to use this equipment.
The device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference which may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
WEEE COMPLIANCE
from 10 to 32 VDC
Max. 1.8 A
Max. 5 mA
Power on LED (green)
Li-Ion Battery: max. 2.5 hours
RS232
up to 115200 b/sec
-20° to +50 °C / -4° to +140 °F
-20° to +70 °C / -4° to +158 °F
90% non condensing
IP20
118.5 x 321 x 104 mm / 4.66 x 12.63 x 4.09 in
about 770 g / 27.16 oz
822000690
Kyman-NET™ Vehicle Cradle
The Kyman-NET™ Vehicle Cradle allows charging the Kyman-NET™ mobile computer battery and
holding it securely in your vehicle. It also functions as a serial communication interface between a Host
(typically a Laptop PC) and the RS232 contacts on the mobile computer.
A
G
F
E
B
C
D
Figure 1 – Kyman-NET™ Vehicle Cradle
External microphone/headset jack, microphone and speaker allow managing a vocal communication (see
related paragraph on next page).
MOUNTING THE KYMAN-NET™ VEHICLE CRADLE
The Kyman-NET™ Vehicle Cradle can be mounted to the
desired surface using the 4 screws together with the 4 nuts.
Figure 2 – Mounting the Kyman-NET™ Vehicle Cradle
A) Microphone
B) Loudspeaker
C) Ext. Microphone/Headset Jack
D) LED Indicator
E) Mobile Computer Contacts
F) Mounting Holes
G) Adhesive Stylus Holder
H) Power Connector (Jack)
H I
I) RS232 Connector