Champion Power Equipment 200934 Operator's Manual
  1. Manuals
  2. Brands
  3. Champion Power Equipment Manuals
  4. Blower
  5. 200934
  6. Operator's manual
Champion Power Equipment 200934 Operator's Manual

Champion Power Equipment 200934 Operator's Manual

Backpack blower
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL
MODEL #200934
BAckPAck BLOwER
REGISTER YOUR PRODUCT ONLINE
at championpowerequipment.com
or visit championpowerequipment.com
wARNING
To reduce the risk of injury, the user must read and understand the operator's manual before using this product. If you do not
understand the warnings and instructions in the operator's manual, do not use this product.
NOTIcE
Do not use E15 or E85 fuel (fuel containing greater than 10% ethanol) in this product. It will damage the engine and void your warranty.
FUEL MIXTURE for this product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle oil in a 50:1 ratio. Pre-mix
unleaded gasoline and 2-cycle engine oil in a clean container approved for gasoline. DO NOT mix quantities larger than usable in a 30-
day period.
SAVE THESE INSTRUcTIONS. This manual contains important safety precautions which should be read and understood before operating the product. Failure to do
so could result in serious injury. This manual should remain with the product.
Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice.
REV 20211129
Champion Power Equipment, Inc., Santa Fe Springs, CA USA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 200934 and is the answer not in the manual?

Questions and answers

Related Manuals for Champion Power Equipment 200934

Summary of Contents for Champion Power Equipment 200934

  • Page 1 This manual should remain with the product. Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice. REV 20211129 Champion Power Equipment, Inc., Santa Fe Springs, CA USA...

  • Page 2: Table Of Contents

    TABLE Of cONTENTS 200934 - BAckPAck BLOwER TABLE Of cONTENTS Maintenance ..........General Maintenance ..........Introduction ........... Cleaning the Air Filter ..........

  • Page 3: Introduction

    200934 - BAckPAck BLOwER INTRODUcTION SAfETY DEfINITIONS Congratulations on your purchase of a Champion Power Equipment The purpose of safety symbols is to attract your attention to (CPE) product. CPE designs, builds, and supports all of our possible dangers. The safety symbols, and their explanations, products to strict specifications and guidelines.

  • Page 4: Important Safety Instructions

    IMPORTANT SAfETY INSTRUcTIONS 200934 - BAckPAck BLOwER IMPORTANT SAfETY INSTRUcTIONS wARNING  – Clear the work area before each use. Remove all objects DANGER  such as rocks, broken glass, nails, wire, or string which The blower engine exhaust contains carbon monoxide, can be thrown or become entangled in the machine.

  • Page 5: Fuel Safety

    IMPORTANT SAfETY INSTRUcTIONS 200934 - BAckPAck BLOwER – Gasoline can cause a fire or explosion if ignited. wARNING  – Gasoline is a liquid fuel but its vapors can ignite. – Wear a face filter mask in dusty conditions to reduce the –...

  • Page 6: Safety Labels

    B: dieline changed Safety Symbols This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for outside parties without the explicit consent of Champion Power Equipment.

  • Page 7: Safety Symbols

    IMPORTANT SAfETY INSTRUcTIONS 200934 - BAckPAck BLOwER Safety Symbols Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to more safely operate the product.

  • Page 8: Operation Symbols

    6. Move choke knob to RUN position. 2. Move choke knob to CHOKE position. This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for 7. Pull recoil handle 1-6 times.

  • Page 9: Controls And Features

    AND fEATURES 200934 - BAckPAck BLOwER cONTROLS AND fEATURES Read this operator’s manual before operating your backpack blower. Familiarize yourself with the location and function of the controls and features. Save this manual for future reference. Backpack Blower 1. Lower blower tube 10.

  • Page 10: Parts Included

    AND fEATURES 200934 - BAckPAck BLOwER Parts Included Blower tubes ................3 Accessories Spark plug wrench ..............1 Lower Reversible flathead and cross-head screwdriver ....... 1 2-cycle oil ............2.6 fl .oz.(76 ml) Middle Upper Assembly Parts Blower body ................1 Clamps ..................

  • Page 11: Assembly

    ASSEMBLY 200934 - BAckPAck BLOwER ASSEMBLY Your blower requires some assembly. If you have any questions regarding the assembly of your blower, call our Technical Support Team at 1-877-338-0999. Please have your serial number and model number available. 1. Attach flex tube to elbow on blower body. Tighten the clamp fully.

  • Page 12: Operation

    ASSEMBLY 200934 - BAckPAck BLOwER OPERATION fueling and Refueling Fuel Mixture This product is powered by a 2-cycle engine and requires pre- mixing gasoline and 2-cycle oil in a 50:1 ratio. Pre-mix unleaded gasoline and 2-cycle engine oil in a clean container approved for gasoline.
  • Page 13 ASSEMBLY 200934 - BAckPAck BLOwER To Start a Cold Engine: 1. Blower should be on a flat, bare surface for starting. 2. Set the choke knob to the CHOKE position. 6. Move choke knob to the RUN position and pull recoil starter handle until engine starts.

  • Page 14: To Stop The Engine

    ASSEMBLY 200934 - BAckPAck BLOwER 2. Holding the unit firmly, pull starter grip until engine starts. OPERATION: Use short pulls and do not allow the rope to snap back. – Check your equipment before operation, especially the muffler, Do not pull more than 5 times.

  • Page 15: Cruise Control Feature

    MAINTENANcE 200934 - BAckPAck BLOwER cruise control feature wARNING  The cruise control lever can be used to operate the blower at Before inspecting, cleaning, or servicing the machine, shut off desired speed without holding the throttle trigger. engine, wait for all moving parts to stop, and disconnect spark –...

  • Page 16: Fuel Cap

    SPEcIfIcATIONS 200934 - BAckPAck BLOwER 3. Inspect and replace or clean the air filter. To reassemble EVERY 25 HOURS make sure the filter fits in the cavity and reinstall the filter — Clean cylinder fins and intake cooling vent. as shown. Fasten the air filter cover by turning the fasteners clockwise.

  • Page 17: Troubleshooting

    TROUBLESHOOTING 200934 - BAckPAck BLOwER TROUBLESHOOTING Problem Cause Solution Fuel mixture is too rich. Open choke. Fuel strainer clogged. Clean fuel strainer. Fuel line clogged. Clean fuel line. Engine does not start. Let unit sit for 15 minutes or remove spark plug Flooded engine.
  • Page 18 Consequential Damage Repair/Replacement Warranty Champion Power Equipment disclaims any obligation to cover CPE warrants to the original purchaser that the mechanical and any loss of time, use of this product, freight, or any incidental electrical components will be free of defects in material and or consequential claim by anyone from using this product.
  • Page 19 THE UNITED STATES ENVIRONMENTAL PROTECTION AGENCY (U.S. EPA) EMISSION CONTROL SYSTEM WARRANTY Your Champion Power Equipment (CPE) engine complies with U.S. EPA emissions regulations. YOUR WARRANTY RIGHTS AND OBLIGATIONS: The U.S. EPA and CPE are pleased to explain the Federal Emission Control System’s Warranty on your 2021 small off-road engine and engine powered equipment.
  • Page 20 EMISSION CONTROL SYSTEM WARRANTY 1. APPLICABILITY: This section applies to Emissions Control Systems on small off-road engines or equipment that use small off-road engines subject to the emission standards in this Article. The warranty period begins on the date the new engine or equipment is delivered to an ultimate purchaser and shall continue for 24 consecutive months thereafter.
  • Page 21 You must take your CPE engine or the product on which it is installed, along with your warranty registration card or other proof of original purchase date, at your expense, to any Champion Power Equipment dealer who is authorized by Champion Power Equipment, Inc. to sell and service that CPE product during normal business hours.

Table of Contents