LCD DISPLAY PANEL LED1 LED2 imer Clock display area n timer inute Off timer Week SUN MON TUE WED THU FRI SAT Temperature Room temp display area Fan speed Fan speed display area * Hot water Water temp display area * Humidity Humidity display area Mode...
KEY FUNCTION Quickstart: 1、 “ ”-On/Offkey: First step: Press “Mode” key to select a operation Press once to turn on the system and mode that want to running. press once more to turn off the system. Second step: Press “▲” or “▼” to setting the 2、 “M”-Modekey: setpoint temp.
LED INDICATOR There are 2 LED indicator: LED1 is green is yellow colour indicating networking colour indicating on/off status. It will light control. It will light up if system is in up if system is on and turn off if system is networking control mode.
Page 6
If hot water supply function is Press “ ” once to activate the energy configured on the main board, saving function. Press once more to press “Program” once to activate deactivation this function. Energy hot water function and screen saving function will be deactivated automatically when unit is on/off, shows symbol .
ERROR CODE & EXPLANATION Should there be system fault on the green LED flashes apart from showing main board, Please contact with sales the error code if the system make fault. or specially trained personnel! Hold down “Set” and “Up” keys for 5 sec to send the fault reset command to the main baord.
Step 4: Connect the connecting line of the wallpad to the main board corresponding terminal. to mainboard screw screw to mainboard screw rear to wallpad screw rear cover (installation) SAKURA CORPORATION Tel: (81)45-949-8550 Fax: (81)45-949-8551 E-mail: mail@sakura-aircon.com URL: www.sakura-aircon.com 2-17-1. Eda-minami, Tsuzuki-ku, Yokohama, Kanagawa, 224-0007, Japan...