Additional Information; Using A Usb Ac Adaptor - Sony ICD-UX512 Operating Instructions Manual

Additional Information

Using a USB AC Adaptor

USB connector of the IC recorder
USB AC adaptor
(not supplied)
You can charge the rechargeable battery by
connecting the IC recorder to an AC outlet
using a USB AC adaptor AC-U50AG (not
supplied). You can charge the battery while
you are using the IC recorder, so that it is
useful when you want to record for a long
time.
When you use the IC recorder for the first
time, or after you have not used the IC
recorder for a certain period of time, charge
the battery continuously until "
displayed.
It takes about 3 hours 30 minutes to fully
charge an exhausted battery.*
1
Connect a USB AC adaptor (not
supplied) to an AC outlet.
2
Slide the USB slide lever on the back of
the IC recorder and connect the USB
DIRECT connector to the USB AC
adaptor.
While the battery is charging, the battery
indicator is displayed in an animation.
Now you can use the IC recorder while
charging the battery.
* This is an approximation for the time it takes
to charge from no remaining battery power
to full battery power at room temperature. It
varies depending on the remaining power
and the condition of the battery. It also takes
" is
more time if the temperature of the battery is
low, or if the battery is charged while you
are transferring data to the IC recorder.
P Notes
• While playing back files using the built-in
speaker, you cannot charge the battery.
• You cannot charge an LR03 (size AAA)
alkaline battery (not supplied).
Battery indicator
109 GB