Page 1
2016/5/25 285 mm V1.0 修改开关零线的连接方式 Quick Installation Guide 罗 西 2016/6/3 Mounting EPS Box(UK) Introduction V1.1 修改页码和参数格式 EPS Box is a manual 罗 西 2016/6/20 EPS Load Connect wires V1.2 修改L/N线颜色,修改盒子外形 Tools and Packing List checking 罗 西 2016/6/29 Open the box 技术要求:...
Page 2
Quick Installation Guide Mounting EPS Box(UK) Box shell-GND Introduction EPS Box is a manual changeover switch which is compatible with SolaX hybrid inverter. Configured with EPS Box, customers just need to connect EPS Box several wires between inverter and EPS Box.
Page 3
5.3 Load-wires connection 5.6 Checking Please make sure all wires are tightened. Insert LOAD-L wire and LOAD-N wire into ports of contactor(3&7) through the hole. to the ground LOAD-L wire —— to GRID LOAD-Nwire —— 7 to EPS port of inverter LOAD-L/Nwire~2AWG Load-N wire Load-L wire...
Need help?
Do you have a question about the EPS Box and is the answer not in the manual?
Questions and answers