Various Recording Modes; Adding A Recording; Using An Adding Recording - Sony ICD-P630F Operating Instructions Manual

Various Recording Modes

Adding a Recording

Using an adding recording

At a factory setting, you cannot add a
recording not to erase the message by
accidental operation. If you want to add
a recording to a previously recorded
message or add an overwrite recording,
change the REC-OP setting in the
procedures below.
1
Press DISPLAY/MENU for more than
1 second until "MODE" appears in
the display window.
2
Press – or
 
"REC-OP" and press
ENTER.
The adding recording window will be
displayed.
3
Press – or
 
and press  PLAY/ENTER.
The setting is changed.
+ to display
 PLAY/
+ to select "ON"
4
Press – or
 
"ADD" or "OVER" and press
PLAY/ENTER.

• ADD: adds a recording to a
previously recorded message
• OVER: adds an overwrite recording.
5
Press (stop) to exit the menu

mode.
To prohibit to add a recording
In step 3, select "OFF" and press
 PLAY/ENTER.
+ to select
1
GB