New Holland T4.90 FB Service Manual page 13

1.2.1.1.3 Machines and Installations
- Before starting work, check that the protective devices and guards are fitted correctly in place and in
proper working order, and that all safety devices are working correctly;
- check that any fume extraction and/or ventilation systems in place are working correctly;
- the protective guards and safety devices of machines and installations must never be removed except
when strictly necessary for a specific task and only with prior authorisation from your superiors, who
will inform you of the substitute safety measures to adopt;
- protective guards and safety devices must be refitted correctly and reactivated as soon as the reason
for their temporary removal no longer exists;
- never clean, oil or grease the moving parts of machines and installations by hand;
- never work on or adjust moving parts.
1.2.1.1.4 Lifting and transporting
By hand
- keep your back straight when lifting loads;
- hold the load as safely as possible using the most accessible and comfortable grip points;
- do not carry loads with oil or grease on your hands;
- hand trolleys with no tow bar must always be pushed and not pulled;
- do not place loads near staircases, firefighting installations, first aid stations and transit areas.
When working with motorised machinery
- comply with load limits and drive at an appropriately safe speed in relation to the route taken and the
load carried and to be sure that the machine can be stopped safely;
- ensure that loads are fastened safely with straps and securely attached;
- do not drive with a suspended load in places where a falling load may constitute a hazard - if this is
unavoidable, ensure that all persons in the area are adequately warned of your manoeuvres or keep
persons out of the area;
1.2.1.1.5 Driving in indoor spaces
Persons
- use permitted and designated walkways (pedestrian crossings, walkways etc.);
- do not run;
- do not walk or stand under suspended loads and keep out of areas which may be subject to the risk of
falling loads;
- do not ride on transport or lifting machinery intended for handling materials only.
Vehicles
drive at moderate speed and take all precautions necessary for the route taken - observe all company
regulations and signage.
INTRODUCTION
1-10