Page 1
SHX Bubble Tube User's Manual Product name User's Manual References included in this manual BJ-ETBS February 2017 Version...
Page 2
SHX bubble tube User's Manual Safety Precautions Please read the whole manual before you start. The product should always be used under adult supervision. Do not move or tip the tube once it is filled with water. For this reason it should be placed in the final position before filling.
Page 3
1. Introduction to the product The bubble tube produces an extreme visual effect with very smooth colour changes. The effect is accompanied by bubbles circulating upwards stimulating visual tracking. This model is suitable for rooms with SHX system, offering unlimited control options with any SHX elements.
Page 4
SHX bubble tube User's Manual 3. Before you start: conditions for correct operation The bubble tube is ready to use, just fill the tube with clean water, leaving a gap at the top of 8 to 10cm. After it is filled with water, two electrical connections must be made.
Page 5
If a switch is connected to the tube control input, the bubbles can be controlled independently from the software's operation. The bubbles can also be controlled from the environment controllers. The codes to control the bubbles are: Code 43: ON / OFF Code 74: OFF Code 89: ON 5.
Page 6
SHX bubble tube User's Manual 6. Additional information If the tube configuration is lost, see the Installation Guide DMX address: 128 Warranty Within the legal warranty period we agree to rectify for free by repairing or replacing defects in the product derived from defective materials or manufacturing defects.
Need help?
Do you have a question about the SHX Bubble Tube and is the answer not in the manual?
Questions and answers